Nisshin Technology - Máy mài khí gốc 90˚, 120˚ UHT

Máy mài khí cấm tay, lấy ba via, đánh bóng khuôn của nhà cung cấp Uht.

MAG-121N(120 angle type) For precision griding and polishing
MAG-122N(120 angle type) For surface griding and polishing
MAG-093N(90 angle type) For surface griding and polishing
MAG-123N(120 angle type) For surface griding and polishing

Micro angle grinder

	120 and 90 degrees angles are prepared based on the human engineering.
	The unpleasant noise is reduced, which tends to come out by the angle type.
	Abundant tip tools correspond to various uses.

MAG-121N Set

MAG-121N•Air hose1.5m•Hose band 2 pcs•Quick joint•Over hose• Set pin•Wrench•

13 Mounted point NSL 2pcs.•Lap shaft•

25 disk type NSL7pcs.•Mounted point

10 Rubber disc holder•

10Pol-Per system9pcs.

MAG-122N Set

MAG-122N•Air hose1.5m•Hose band 2 pcs•Quick joint•Over hose• Set pin•

20 cups grinding wheel 1 pcs.•

20Rubber disc holder•

20NSL7pcs.•

20Pol-Per system9pcs.

MAG-123N Set

MAG-123N•Air hose1.5m•Hose band 2 pcs•Quick joint•Over hose• Set pin•

30 cups grinding wheel 1 pcs.•

30Rubber disc holder•

30NSL7pcs.•

30Pol-Per system18pcs.

MAG-093N Set

MAG-093N•Air hose1.5m•Hose band 2 pcs•Quick joint•Over hose• Set pin•

30 cups grinding wheel 1 pcs.•

30Rubber disc holder•

30NSL7pcs.•

30Pol-Per system18pcs.

Model	Code No.	Max.number of revolutions	Max.size (Not including tip tools)	Air pressure supply	Air consumption (per min.)	Weight	Price
MAG-121N	108	52,500rpm	148 × 55 × 17	0.6MP	120NL	140g	36,000yen
MAG-122N	107	35,000rpm	141 × 45 × 17	0.6MP	120NL	140g	36,000yen
MAG-123N	106	23,500rpm	142 × 48 × 32	0.6MP	120NL	175g	36,000yen
MAG-093N	105	23,500rpm	138 × 41 × 33	0.6MP	120NL	160g	36,000yen

Catalogue


		(1.6MB)

Máy mài khí gốc 90˚, 120˚ UHT